Microcement made simple.
Build your project and order everything in one page.
Seamless microcement for bathrooms, kitchens, living spaces, walls, floors, cabinetry and outdoor areas. Choose your space, colour and finish — we size the right system for you.
Choose your project area
Pick every space you're covering — we'll suggest the right system automatically.
Select as many areas as you like — tap again to remove. Residential and commercial add together.
Surface conditions
Set automatically from your areas — nothing to decide here.
Locked to your selection — change areas above to change this.
Your recommended system
We match the system to your areas — wet and exterior zones get the higher-protection build.
Choose your colour
One colour for your whole project. Pick a family, set the depth, tap your shade.
Five designer-built palettes — tap one and we narrow the shades down for you.
Choose your finish
The surface feel and sheen. Same colour, four characters.
The finish is your call — it's saved with your order and passed straight to your installer. We supply the complete material kit and connect you with the best partner installer in your area; they price their workmanship based on the finish you choose.
Estimate your quantity
Your areas are already grouped below. Enter total coverage per surface — or add each wall, floor or ceiling one by one.
Walls measure length × height; floors and ceilings length × width. Prefer totals? Use the m² field on any row.
Ready to complete your project?
Everything sized, everything included — one click to checkout.
A qualified professional reviews your selections and confirms the final coat recommendation before your order is processed.
Four steps, one seamless surface
Six layers, one seamless surface
Why two different sealers? Indoor floors get a hard-wearing chemical-resistant sealer built for traffic. Outdoor surfaces get a breathable sealer instead — outside, the surface must let moisture escape, so the hard indoor sealer is never used there. Your kit ships with the right one automatically.
Everything worth knowing about microcement.
Straight answers, independently tested claims, and the honest limits too. This is the same knowledge we give every installer and every homeowner we work with.
One finish. Every surface.
Walls, floors, ceilings, benchtops, furniture — indoors and out.
Microcement isn’t a floor product or a wall product. It’s a surface system — built up in thin coats over almost anything structurally sound, from bathroom walls to kitchen benchtops to the alfresco outside. Because it bonds rather than lays, the same material family runs through your whole home: a purpose-built system for each job, one continuous look across all of them. Not sure a surface qualifies? Send us a photo — we’ll tell you straight.
More detail
- Walls & ceilings — lightweight, no structural reinforcement required
- Floors & high traffic — reinforced with fibreglass mesh for crack resistance
- Showers, splashbacks & laundries — applied over a compliant wet-area membrane
- Outdoor zones — a breathable system built for expansion, contraction and moisture
- Furniture, curves & bespoke pieces — a dedicated fine-finish system
- Honest limit: the substrate must be structurally stable — microcement never bridges expansion joints or live cracks
Renovate over. Not rip out.
Goes straight over sound tiles, concrete and render — no demolition, no skip bin.
The most expensive part of most renovations isn’t the new surface — it’s tearing out the old one. Microcement skips that step. At just 2–3 mm total, it overlays existing tiles, concrete and render: a clean, demolition-free application with minimal disruption, noise and waste. Old tiled walls are prepared properly — stability check, grout lines filled, surface primed — so the tile pattern never shows through. Doors still close. Thresholds stay level. The mess of demolition simply never happens.
More detail
- Total system thickness typically 2–3 mm — adds almost no height or weight
- Tile-over prep: stability check, joint filling, mechanical roughening and a dedicated smooth-surface primer
- Industry context: removing old tiles typically costs $50–$120/m² before a single new material arrives
- Faster, quieter renovations — no jackhammers, no dust storm, no skip on the driveway
Thin surface. Serious strength.
Mesh-reinforced, polymer-modified, tested to European impact and abrasion standards.
Don’t let the 2–3 mm fool you. Every trafficable system embeds a fibreglass mesh in its first base coat to boost tensile strength and prevent microcracking. Our pool-grade system tests at a compressive strength of around 40 N/mm², with impact and abrasion resistance verified to EN 6272 and EN 13892. Heat won’t soften or warp it — its thermal behaviour is comparable to concrete. It isn’t indestructible: sharp impacts can chip any decorative surface. But installed correctly, it’s built for real life.
More detail
- Compressive strength ~40 N/mm² — independently tested (pool-grade system)
- Impact & abrasion resistance verified to EN 6272 and EN 13892
- Fibreglass mesh is standard in the first base coat on floors, exteriors and benchtops
- Won’t soften, warp or deform in high summer temperatures
- Sealers reach full mechanical and chemical resistance after about 7 days
Made for wet areas. Honestly.
Zero water absorption when sealed — over a certified membrane, the way wet areas should be built.
Here’s the straight answer most suppliers won’t give you: microcement is water-resistant, not a waterproofing membrane. In a shower, a compliant AS 3740 membrane goes down first; the microcement is applied over it and sealed on top. Done that way, the system performs — CSIRO testing recorded zero water absorption over a four-hour test on the sealed surface. And with no grout lines and a non-porous sealed finish, there’s nowhere for mould and mildew to take hold.
More detail
- Sealed surface: zero water absorption over a 4-hour CSIRO test, supporting AS 3740 use
- No grout + non-porous surface = nowhere for mould and mildew to grow
- Pool-grade system: zero water transfer through a 2 mm layer under pressure (EN 12390-8), chlorine and UV resistant
- The membrane does the waterproofing; the microcement is the beautiful, water-resistant finish above it
Easy to live with. Easy to keep.
A sealed, grout-free surface that cleans with a damp mop — and a care routine we ship with it.
Day to day: dust with a microfibre, then a damp mop with warm water and a pH-neutral cleaner. That’s it. In CSIRO testing the sealed surface withstood bleach-based cleaners, acids and detergents with no visible change — though for the long life of your sealer, keep bleach, vinegar and abrasives in the cupboard. Every order ships with our care guide, and Clean & Revive+ actively rejuvenates the sealant as you clean. Plan on resealing every 2–5 years — a light sand and re-coat, not a renovation.
More detail
- Routine: dry dust + damp non-abrasive mop with a pH-neutral cleaner or Clean & Revive+
- CSIRO chemical test: no visible change, blistering or gloss loss from bleach-based cleaners, acids or detergents
- Still avoid: bleach, ammonia, vinegar, scouring pads and steel wool — they shorten sealer life
- Felt pads under furniture, doormats at entries, wipe wine and citrus promptly
- Reseal every 2–5 years depending on traffic — light 120-grit sand, clean, re-coat
No joints. No grout. No interruptions.
2–3 millimetres of continuous, hand-finished surface — the European look Australians fly across the world for.
Tiles are a grid. Microcement is a single gesture — one continuous, joint-free surface flowing across walls, floors and curves. It’s the finish behind Europe’s most photographed interiors: soft mineral texture, natural depth and movement, the warmth of stone with the freedom of a bespoke surface. No grout lines to clean, discolour, or chop the eye — small rooms read larger and calmer. Every finish is tinted to order, from soft coastal whites to deep earthen tones.
More detail
- Ultra-thin: the whole system is 2–3 mm thick
- Hand-applied by nature — every surface carries subtle, one-of-a-kind movement
- Developed and manufactured in Spain; 15+ years in decorative continuous surfaces
- 48 designer colours — 16 toners, each in three depths
Two sealers. One rule.
Breathable outside. Hard-wearing inside. The sealer is chosen for the life the surface will live.
The sealer is the layer you actually live on — so we spec it to the job. Microshield is our water-based, breathable sealer: outdoors, on facades and alfresco floors, breathability is what stops moisture being trapped beneath the finish — it’s the only sealer that should ever be used outside. Superiorseal is the opposite temperament: a two-part polyurethane built for bathrooms, kitchens and hard-working floors where liquid exposure and traffic never let up. Order the right system and the right sealer arrives with it — no guesswork.
More detail
- Outdoor rule from the application guide: Microshield only — never an airtight indoor sealer outside
- Superiorseal: tested for chemical resistance, continuous liquid exposure and heavy traffic
- Two coats, always — full coverage and durable thickness
- Slip-critical zones: fine glass microspheres in the first sealer coat reach up to a P5 slip rating
Tested here. Proven here.
Independently tested by CSIRO and AWTA against the Australian standards that apply to real homes.
There’s no dedicated Australian Standard for microcement — so Microestil proves itself against the performance standards that govern real rooms, through certified independent laboratories including CSIRO and AWTA. Slip testing under AS 4586 rates the standard sealed finish P2, with anti-slip options tested up to P5 — the highest wet-pendulum classification. And in the AS/NZS 3837 fire test, a 2 mm coating didn’t ignite in ten minutes — a Group 1 fire rating, the highest NCC classification, is achievable. Test reports available on request.
More detail
- AS 4586 (slip): P2 as standard; up to P4–P5 with microsphere additive — NCC-accepted for stairs, ramps and wet areas
- AS 3740 (wet areas): zero water absorption in CSIRO’s 4-hour test, over a compliant membrane
- AS/NZS 3837 (fire): did not ignite or sustain flame; Group 1 achievable — suitable even for fire exits and high-rise interiors
- Mineral-based and non-combustible by nature; low-VOC; cured surface is inert and non-toxic
- Available on request: slip reports, CSIRO water/chemical report, AWTA fire certificate
Surfaces we've brought to life
Ready to start your project?
Everything you need. One simple page. Expert help whenever you want it.
- Fast shippingAustralia-wide
- Expert supportSpec to finish
- Quality you can trustPremium systems
- Secure checkoutEncrypted & safe